Do you have a senior loved one at home you care for and wish to protect their independence and privacy?
A Life Assure medical alert device provides reliable, in-home emergency support. These devices have a high-quality speaker and sensitive microphone to ensure two-way voice communication. You can wear water-resistant necklaces and wristbands in the bath or shower.
The Life Assure Medical alert devices have an extended range of up to 600 feet from the base area. They run on powerful batteries that can last up to 80 hours. Some devices are compatible with cable and VoIP phone services. After getting the correct device, you must set it up correctly.
The following steps will simplify installing your Life Assure Medical Alert device.
1. Choose the Most Appropriate Location
The position of the Life Assure home medical alert device determines user-friendliness and performance. Install the base unit in the most central area, ensuring quick accessibility. It should provide an undisturbed signal distribution to the wearable pendant throughout the house. The base unit should offer maximum range for the senior to call for help in the bathroom, kitchen, or bedroom. Central locations provide better freedom for the user to move around their home.
Place the central unit close to a phone jack and power outlet. A strategic location simplifies the installation process and eliminates the clutter of scattered wires. Additionally, strategic unit position avoids potential tripping hazards. It creates an organized and clean setup while ensuring the system remains functional and plugged in. A frequently used and visible spot reminds you of the existence of a pendant.
2. Use a Quick Start Guide
Every Life Assure medical alert system has a unique installation manual. The installation manual provides insights into the setup process. However, it contains comprehensive technical information and troubleshooting steps. On the other hand, a quick start guide focuses on the basics, offering straightforward installation tips. It is a step-by-step guide comprising helpful visuals and audio.
The quick start guide allows caregivers and seniors to set up the device. It helps you avoid confusion and get the device working in minutes. Also, the quick start guide eliminates unnecessary and guesswork setups. You can activate and test your device without delays, avoiding costly mistakes.
3. Plug in the Power Before the Phone Line
Plug your central unit into electricity before connecting the phone line. The step avoids resets and connection errors triggered by the unit as it attempts to connect to the monitoring unit. It allows the device to initialize and prepare the internal systems for efficient operation. Powering the device lets it boot up and recognize the components to reduce technical hiccups that necessitate troubleshooting later.
Connecting the device’s phone line after powering the base unit prevents communication errors. It avoids failures and resets when the device connects before powering on. The correct setup order ensures a smooth process and reliable connection.
4. Wear the Portable Device
The base unit is only a hub for centralizing emergency communication. It can never keep you connected to emergency support. Many companies offer a wearable device to ensure timely access to emergency solutions. Because emergencies can occur, wearing the pendant, necklace, or wristband after the system setup prepares you for the unexpected. The habit encourages regular use and ensures you stay protected no matter the situation.
Wearing the pendant after setting up the system allows you to test its functionality and comfort. You can decide between the neck and wrist options. Additionally, you can walk around the house wearing the device to see if it receives adequate signals. Early wear ensures you understand how optional fall detection works and where it works best. The sooner you integrate the wearable device into your routine, the quicker you feel comfortable and relaxed.
5. Test Call the Support
Setting up the base medical alert system and connecting the wearable equipment is only part of the process. What if your device connects but never sends signals to the monitoring center? Conduct a test call with the Life Assure monitoring center to ensure the system works correctly. Place the help button on the wearable or base unit to connect with a professional. If the device is functional, it will connect you to a skilled operator, ensuring seamless communication.
The call confirms its functionality and efficiency. It brings you closer to the emergency team so you can understand the response process. When the unit has setup issues, the operator will guide you in fine-tuning the system. That can save you from the technical errors and confusion associated with setting up the device while bringing you peace of mind from the beginning.
Wrapping Up
Installing your Life Assure medical alert device is neither impossible nor too easy. It requires a strategic approach to put everything in place. Start by identifying a strategic location. Use the quick start guide to get the device installed.
Connect your device to the power outlet and then the phone line. You can then wear the pendant. Run a test call with Life Assure support. The test call helps you know if the device works. Ensure everything works as expected and get an expert to troubleshoot the system if it fails.
Read more:
Simplifying The Life Assure Medical Alert Device Setup
